Category: Laser Cutting

In my first xTool S1 camera post (E12), I mounted a small camera inside the machine so I could watch the laser work from my desk. It worked, and the low angle made the beam look spectacular. But it had one big limit: from down there, I could not really see the process area. Version…

The honeycomb bed on the xTool S1 is one of the most useful accessories you can have. It lets you position material without it sitting flat on the base plate, improves airflow underneath the workpiece, reduces back-marking, and gives you a useful reference surface with built-in dimensions. Magnets can also hold parts in place when…

After adjusting the kef compensation, I realized that my parts where still to small ! The tray I cut was still about 0.4 mm too short ! My experience of building 3D printer told me there must be a linear accuracy issue ! I have a lot f experience in building 3D printers and the…

The XTool S1 laser cutter removes a small amount of material called kerf during cutting, affecting part dimensions. Using a digital caliper to measure kerf accurately is crucial for achieving precise fits in assemblies. XTool Studio allows for kerf compensation, ensuring final parts match design specifications, enhancing accuracy and professional results.

The XTool S1 laser engraving and cutting process relies heavily on the chosen material, which can vary significantly between suppliers and batches. Conducting material tests is crucial to adjust settings accurately and ensure consistent quality. Skipping this step can lead to wasted materials and potential financial losses, underscoring the value of testing for successful projects.