Category: Uncategorized

I’ve been a 3D-printing enthusiast for more than ten years. In that time I’ve owned a succession of printers—from early Cartesian machines to more recent CoreXY and delta designs—and I’ve gone through more spools of filament than I care to count. As an engineer, the printer has always been one of my favorite tools. Whenever…

The material shrinkage calibration in Bambu Studio is one of the most overlooked parameters in the entire software. Even if you are using official Bambu Lab filament, the shrinkage value is set to 100% by default. That means the slicer applies zero compensation.Just like flow rate and pressure advance, shrinkage compensation is critical if you…

The honeycomb bed on the xTool S1 is one of the most useful accessories you can have. It lets you position material without it sitting flat on the base plate, improves airflow underneath the workpiece, reduces back-marking, and gives you a useful reference surface with built-in dimensions. Magnets can also hold parts in place when…

After adjusting the kef compensation, I realized that my parts where still to small ! The tray I cut was still about 0.4 mm too short ! My experience of building 3D printer told me there must be a linear accuracy issue ! I have a lot f experience in building 3D printers and the…

The XTool S1 laser cutter removes a small amount of material called kerf during cutting, affecting part dimensions. Using a digital caliper to measure kerf accurately is crucial for achieving precise fits in assemblies. XTool Studio allows for kerf compensation, ensuring final parts match design specifications, enhancing accuracy and professional results.

The author shares their experience creating an organized system to manage tools and parts on their workspace bench using a stackable tray made from laser-cut plywood. They highlight the efficiency and sustainability of laser cutting over 3D printing, emphasizing the importance of dimensional accuracy and calibration for successful integration of components.

The XTool S1 laser engraving and cutting process relies heavily on the chosen material, which can vary significantly between suppliers and batches. Conducting material tests is crucial to adjust settings accurately and ensure consistent quality. Skipping this step can lead to wasted materials and potential financial losses, underscoring the value of testing for successful projects.

A good 3D printer like the Bambu Lab H2D is an incredibly versatile tool. It lets you turn your ideas into physical parts quickly—especially if you can design your own CAD models. As a mechanical engineer with over 10 years of 3D printing experience, I’ve relied on them heavily for functional mechanical projects. From Early…